Colloidal silver with timer, 37volt output.
This colloidal silver maker has a current limited 37v ouput.  This higher voltage will mean that the colloidal silver is produced faster. This is especailly important if you are going to make the yellow coloured  colloidal silver

The most common problem experienced by our customers whilst making golden colloidal silver is forgetting to turn off their colloidal silver maker.

Our new colloidal silver maker, model T2, solves this problem. It contains a built in timing device which can run from 2 to 20 mins (approx). Now all you have to do is select the time interval you want and switch on. The yellow indicator lamp will light up. When the selected time has elapsed the yellow indicator lamp goes off. The green lamp remains on to show the device is still switched on.

This unit increases the out voltage from 27v to 37v which is achieved using one PP3 battery and some clever electronics. We have also incorporated a low battery warning lamp so you know when to change the battery.

The new T2 machine also comes with double size silver electrodes (80mm) which offers two advantages; the electrodes are twice as long and will produce twice as much colloidal silver. Secondly, because the electrodes are remote from the machine, the water can be heated to greater temperatures without risking any damage to your electronics.

 

The unit is also supplied with an industrial alkaline PP3 battery.